Acard 11 Target Blu-ray/DVD/CD Stand-Alone Manual Tower Duplicator SATA Controller

1-to-11 Professional SATA BD Duplicator Controller Support 6X BD Recording

ACARD-11T is a standalone duplicate controller supporting high speed SATA BD/DVD/CD writers. With ACARD RISC CPU Engine, it doesn’t need connecting to a computer or require much learning. Simply through the LCD and the button on the panel you can use the copy controller to back up data, audio or video BD/DVD/CD quickly. It support SATA BD/DVD/CD drives for recording BD/DVD/CD quickly. It is quite fit for general offices.




- A standalone SATA-to-SATA BD/DVD/CD copy controller
- Independent fully native SATA channel data acceleration
- Totally independent without installing hardware or software
- Supports a built-in 3.5" or 2.5” SATA hard disk drive
- Supports high-speed SATA BD/DVD/CD recording
- Has a user-friendly interface and shows messages with LCD
- Firmware update by DVD-ROM
- Support M-DiscTM media for valuable data last up to 1000 years*

*Please note, only M-DiscTM Ready Drives and media supports M-Disc technology. Please check M-DiscTMofficial website for compatibility.



- ACARD 32-bit RISC with SATA SOC controller
- 16Kbyte data cache inside the SOC
- High reliability of SDRAM for embedded system
- 13 SATA interface channel
- 2 X 16 LCD screen
- A membrane 9-buttons operation panel
- 512KB flash memory for copy code
- Dimension: 150mm(W)× 42mm(H)× 145mm(D)

System Requirement

- Upright external case 12/13 X 5.25"
- Power supply
- SATA cable
- Digital DVD-ROM x 1
- Digital DVD writer x 11
- SATA hard disk drive (optional)
- Tray (optional)